Rated 4 out of 5Â by Gaffer2 Great value
I've only just fitted these hinges so I've no idea about reliability but I suspect they'll be fine. They weren't quite a direct swap for the originals but I didn't really expect them to be. The originals had a metal locating 'V' at the top, these have a plastic 'V' which being thicker meant the window sits lower in the frame. Re-drilling the window was all that was needed for a perfect fit
9 Oct 2014
Rated 4 out of 5Â by charlie13 Minor adjustment to install
As per previous review the 13.5mm dimension refers to overall stack height of the hinge. The actual width of the bars is something like 16mm but can't remember exactly and I didn't write it down when I measured them before install. The design of the bar that mounted into the groove on the opening window meant the mechanism rubbed against the frame as it moved, so i had to shim it out slightly but other than that they were a doddle to fit on to a small upper window. The hole positions were different from the original hinges, but as these were all fitted with self-tapping / self-drilling screws this wasn't an issue.
7 Oct 2013
Rated 2 out of 5Â by DrewA Not Good
I would not recommend this because I'm having to return it, the screw holes were all in the wrong place, and to make it fit I would have had to drill within 1mm of another hole.
1 May 2013
Rated 4 out of 5Â by Expandyman Its a Friction Hinge
This hinge was the same size as the pair I was replacing. 262 x 13.5 deep in some aluminium frames. The only difference being the hole positions were all different requiring the frames to be drilled.. There was a very brief sheet with mounting instructions provided, which could ideally a little more comprehensive. Anyway after sucessfully fitting, the window opened and closed just as a window should. Just ordered two more sets. I will come back in 10 years and write up about their reliability.
13 Mar 2013