Rated 5 out of 5Â by hourhands Draught excluder
Good quality, bit more expensive than the sponge type but far superior. proofed 2 doors in 15 mins. One minor point, if it is an existing door you may find the latch doesn't engage as easily as the door closes slightly further from the latch striker plate, sorted easily by moving the striker plate a little towards the door.
3 Jul 2015
Rated 4 out of 5Â by Biggian Quick fitting draught proof
Easy to use just pull off adhesive backing paper and push into place. Draught stopped and house much warmer. Twice the length of similar priced competitors.
2 Apr 2015
Rated 3 out of 5Â by thishousedrivesmenuts Probably works but...
..once again this house makes little jobs difficult.
The house is around 25 years old. When the back door was put in the frame had a recess all round for weather strip which is now brittle and broken. Unable to find a like for like replacement I decided to use this P-Strip as an alternative. Fine on the hinge side, fine on the top but useless on the handle side. Why? Because the door and the frame are almost flush when closed so the foam prevents the door closing.
My next option is to us an all around the door weather strip. However with just a 7mm gap between the frame and the door handle I have a feeling this is doomed from the start.
On the plus side I can use the other 15m of P-strip to stop the internal doors in the house from rattling.
1 Mar 2015
Rated 5 out of 5Â by boatmad Seems to work
Very draughty back door; it took 10 minutes tofix the Pstrip and the difference was immediately noticeable.
21 Feb 2015