Rated 1 out of 5Â by JonathanT Useless
As some other reviewers have stated, these nails are inadequate for most jobs. I attempted to use them to attach 2cm thick hardwood weatherstrips to a softwood door. I drilled pilot holes in the hardwood, but they still bent - 100% of them.
14 Sep 2016
Rated 1 out of 5Â by 0HonestReviewer0 No good if wood over 10mm
Purchased a bag of these on the way to a job this morning which was a bad mistake and wasted an hour of my time having to go back out and get some that work!
These panel pins may work well for thin ply jobs but as soon as I tapped the first one into some 18mm MDF architrave it bent and so did the rest. I tried 10 before I realised they are so weak that you can bend them with your fingers! Will be returning them first thing tomorrow. Avoid if you are planing to pin something thicker than 10mm.
20 Jul 2016
Rated 4 out of 5Â by Diyboy They're sheradised
The bag contains a great number of pins, more than I'm ever likely to need.
Therefore the fact that many are bent or have misshaped heads is not of any great consequence to me, but it may be important to others.
3 Jun 2016
Rated 2 out of 5Â by kdb39 Poor Quality, large quantity.
I bought these panel pins based on previous good feedback, I don't know what's happened but the quality is very poor. I made a small hole in the bag and tipped out a few pins. More than 50% were either badly deformed, bent or too short. they are very cheap so it's not a massive issue and there are obviously 100s of these pins in the bag.
2 Jun 2016