Deck-Tite Double-Countersunk Decking Screws 4.5 x 50mm Pack of 200
Good decking screws
Good screws for decking, as per the other reviews you have to drill a pilot hole when fixing near the edges but otherwise just tap with a hammer to start.
29 Nov 2014
Very good screw
I used these screws to make a shed base,(see my comments elsewhere about angle brackets) I used an electric drill/driver and never had a problem with the strength of them, occasionally if I wasn`t straight on the screw the bit slipped but that was too be expected, as soon as I got it right it didn`t cause any problems, very happy with the quality.
16 Aug 2014
Good screw !
Best screws I've had in a while ! No shearing, no cam-out, good grip, dig their own countersink. Used them on Ipe deck boards and did a good job. Can't say how long before they rust, if the ever do. I chose them over Stainless Steel because I find StSt shear easily.
20 Jul 2014
A quality item
I bought these, and then a box of cheap Timbadeck screws in the same size at Â£1.39 for 100.
The two products are obviously at totally opposite ends of the scale. These are a quality item and that is reflected in the price; they have hardened heads, don't round, drive in well and don't split...but they cost a lot more.
For the volumes I use them in I've opted for the cheaper ones mainly, then use these for jobs where quality is important and I want the heads to weather well.
25 Jan 2013