Conex Male Coupler 302 15mm x Â½"
Good quality fittings
These are a good quality compression fitting and do the job.
6 Sep 2014
Good but needs thin spanner
Used these to adapt to female tap flexi hoses. Worked really well, with the male end of the coupler sealing perfectly onto the flexi's flat rubber washer. I assume this seal will last..
But I did have trouble holding the body of the coupler while tightening the compression nuts - due to the pointless feature of the round flange against the hexagonal section - you can't get a standard adjustable spanner into the gap between this and the compression nut. I had to file off two flats - easy enough; it's brass!
22 Aug 2014
Useful for flexi connections
The male threaded part has a flat ground end suitable for sealing against fittings which use a flat washer as found on flexi tap connectors (the oppostie end to the tap) and others. The other end is a standard compression for connection to 15mm pipe. Actually slightly cheaper here than on "rival" sites!
11 Nov 2013
CONEX FITTINGS - GENERAL
These fittings are nice and thick and with the ribbed rather than hexagonal nuts - really easy to use with a small set of stilsons in a tight space.
22 May 2013