Browse store

Cementone Cementone Bituminous Paint Black 5Ltr (82914)

General purpose, solvent-based paint. Provides a hard wearing, protective layer on wood, metal and cement. Suitable for spray or brush application. Covers approx. 6m²/Ltr.

  • Touch-Dry in 6 Hours, Fully Dry in 24 Hours

More Info

£20.49INC VAT (£4.10/Ltr)

Add to basket for...

Not available for delivery
Cementone Cementone Bituminous Paint Black 5Ltr is rated 4.2 out of 5 by 20.
  • y_2017, m_3, d_20, h_19
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_20
  • loc_en_GB, sid_82914, prod, sort_[SortEntry(order=FEATURED, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_screwfix

Add to saved list...

Save
Rated 4 out of 5 by from Garage roof Used this paint to try and stop my corrugated cement board garage roof from seeping through water onto my car. Had to clean all the vegetation and moss off first, five hours to do, left the roof to dry overnight and then started. I used a 3 inch paint brush to put on due to the corrugations, went on ok, just making sure it was covering all the little indents in the roof for the first coat to fully seal it. Took me 4 hours to do a standard size garage roof. Hopefully the second coat will be quicker to put on as it will be smoother. Yet to have any rain to see if it stops the water coming through, so only 4 stars for that side. Will update when it does rain.
Date published: 2016-11-01
Rated 1 out of 5 by from Don't waste your time. I bought this product last summer to protect the back and side of a summer house that once assembled access would be restricted, thinking job done with 2 coatsit will be many years before I need to do that again. WRONG. After just one winter it washed off exposing the timber underneath. Just finished painting again with another product.
Date published: 2016-09-14
Rated 5 out of 5 by from Black and Sticky I've used other bituminous roof treatments in the past and they tend to be thicker which make them more suited to filling cracks in the surface. However, the less-viscous nature of this product makes it easier to apply. I've given my flat roof 2 coats, about 24 hours apart. The first coat was still a bit sticky when I applied the second. It is horrible stuff to work with, but that's to be expected.
Date published: 2016-08-17
Rated 1 out of 5 by from now not as described This Cementone BITUMINOUS paint has been replaced by a "Bostic" version. The new product is non-bituminous and states - not to be used around tar / bituminous products. Therefore no use for repairs on areas with the old reliable products. Sorry Screwfix, poor show. Am returning product for refund.
Date published: 2016-07-18
  • y_2017, m_3, d_20, h_19
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_20
  • loc_en_GB, sid_82914, prod, sort_[SortEntry(order=FEATURED, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_screwfix

Would this work to prolong the life of a felt roof on a shed?

Asked by: Shedbuilder2014

Is it suitable for waterproofing the inside and bottom edges of a new wooden planter?

The planter will stand on soil, I was thinking of two good coats on the inside and bottom edges and slightly up the outside at the bottom. The planter will be used for flowers etc, not for edible plants.
Asked by: tramSDG
The bostik Black Waterproofing paint is a solvent based bitumen paint designed for exterior applications to materials such as wood, concrete and metalwork.. The product can be used in suitable below ground applications where it will be in contact with soil and it will not affect plants in general. If applying to a wooden planter, it will first need to be dry, then apply two coats of the product, allowing the first coat to dry before applying the second and then ensure that the application is thoroughly dry ( i.e all the solvent has gone from the product ) before using with soil / plants.
Answered by: Bostik Product Support
Date published: 2017-03-13

bitumastic paint?

Is this "bitumastic paint"? Is it suitable to coat steel beam on exterior wall?
Asked by: wilba2
The Bostik Cementone Bituminous Paint Black is a solvent based bitumen paint designed for application to materials such as wood, concrete and metalwork in suitable exterior applications. The product can be applied to a steel beam in general to provide a waterproof coating. However although the product is waterproof, ( which will stop liquid water ingress, it is not damp-proof so it will allow water vapour molecules to pass through. Consequently the beam will require periodical maintenance to account for this. If the application is not accessible when in service, then the product will not be suitable in such a case.
Answered by: Bostik Product Support
Date published: 2017-02-13

Hi, a review on here suggests this has been replaced with a "bostik" type, is this true? Does it have any bitumin in it?

Asked by: Griff84
Thank you for your recent enquiry relating to our product. I can confirm that our product packaging has changed but the product inside has not. Instead of the name Cementone Bituminous Black Paint the name is now Bostik Bituminous Black Paint and appears in dark blue packaging to match the rest of our weatherproofing range. I can confirm that this is a solvent bituminous black paint. I trust this information helps.
Answered by: Bostik Product Support
Date published: 2017-02-08

can this product be used on an asbestos garage roof

Asked by: kunn
Thank you for your recent enquiry relating to our product. I can confirm that our Bituminous Black Paint can be used on asbestos roof sheeting. However, due to the nature of the surface we would recommend you either prime the surface with a bitumen primer or a diluted coat of the black bitumen paint. I hope this information helps.
Answered by: Bostik Product Support
Date published: 2017-03-12
  • y_2017, m_3, d_20, h_14CST
  • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_20
  • loc_en_GB, sid_82914, prod, sort_[SortEntry(order=LOCALE, direction=DESCENDING), SortEntry(order=FEATURED, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_screwfix
Specification
Brand Cementone
Coating & Finishes Drying Time Touch-Dry in 6 Hours, Fully Dry in 24 Hours
Coating & Finishing Type Silk
Coating Finishing Volume 5 Ltr
Colour Black
Manufacturer Guarantee 1 Year Guarantee
Pack Size 1
Parent Colour Black
Pieces in Pack/Case 1
Product Type Cementone Bituminous Paint

Hazardous - Delivery unavailable for any offshore location.

Downloads

Safety Data Sheet (COSHH)