Browse store

Byron Wired Bell Push Solid Brass 32 x 20 x 74mm (80926)

Traditional high gloss brass bell push, perfect as a replacement or additional push. Compatible with all wired Byron chimes.

  • Simple Wired Installation
  • Long Lasting Finish
  • Surface-Mounted

More Info

£9.99INC VAT

Add to basket for...

Byron Wired Bell Push Solid Brass 32 x 20 x 74mm is rated 1.7 out of 5 by 3.
  • y_2017, m_6, d_26, h_23
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_3
  • loc_en_GB, sid_80926, prod, sort_[SortEntry(order=FEATURED, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_screwfix

Add to saved list...

Save
Rated 2 out of 5 by from Lasted 15 months, otherwise OK It's solidly built - metal with a plated gold-like finish, which has lasted reasonably well. I found it easy enough to connect thin solid core wires to the terminals, though it would be hard with multi-strand wires. However the switch is very basic (simply strips of metal that touch) , and open to any water that gets in. I've have two of them, cos they look good - but they only lasted just over a year, in our rather hostile environment on a hill. I tried the black plastic variety, which lasted a few weeks only. I don't think you can buy quality doorbell pushes which are built to last, so this time I have fitted a small sealed 'proper' switch from ebay to the old casing myself; it'll be worth it if it lasts.
Date published: 2017-03-29
Rated 2 out of 5 by from Looks good but poor quality This bell push looks good, and feels heavy and solid, but it was a nightmare to fit. You have to wrap the ends of the bell wires around tiny, small-headed screws and tighten them enough to hold the wire, but without stripping the thread in the thin plastic base. I am a reasonably competent and experienced diy'er, but I had endless trouble with the wire being squeezed out of position as I tightened the screws. I got it to work - eventually. The terminals in this bell need to be redesigned - at the very least they need to have screws with much wider heads to trap the wires securely in place. I can't comment on the long term performance and reliability yet - only had it for a couple of days.
Date published: 2017-03-05
Rated 1 out of 5 by from Don't waste your money Online reviews of this product are split between it being ok or rubbish. I found it to be the latter. It is not solid brass. In order to bring the wire in from the side I had to file a small notch in the 'brass' cover. This revealed it to be a silver coloured metal with a brass plating. The screws for fastening the ends of the wires are tiny and threaded into soft plastic. It is not possible to tighten them much for fear of stripping the thread. Worst of all is that it didn't work! Unscrewing the button revealed two thin contact strips. One had not been assembled correctly and was trapped under a plastic locator. A shiny line on the contact suggested a crack and when attempting bend it back into the correct position it fell off. The white plastic bell push from the same manufacturer is less than a third of the price and the design is much more robust with larger contacts and screws for the wires. Save your money and buy the cheap one.
Date published: 2016-05-30
  • y_2017, m_6, d_26, h_23
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_3
  • loc_en_GB, sid_80926, prod, sort_[SortEntry(order=FEATURED, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_screwfix

Flush fitting

Hello can you please tell me if this bell fits flush on to the door, no drilling of holes necessary.
Asked by: Lorri3
Hello Lorri3 thank you for your enquiry This unit is surface mounted and although not in the image in the catalogue, there is a backplate that sits inside the housing with 2x holes for the screws, so there will be drilling involved for these. You will also need to drill a hole big enough to accommodate the bell wire. Hope this helps!
Answered by: Byron Product Expert
Date published: 2017-03-04
  • y_2017, m_6, d_27, h_10CST
  • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_1
  • loc_en_GB, sid_80926, prod, sort_[SortEntry(order=LOCALE, direction=DESCENDING), SortEntry(order=FEATURED, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_screwfix
Specification
Brand Byron
Colour Brass
Colour/Finish (Ironmongery) Polished Brass
Front Door Furniture Product Type Bell Push
Manufacturer Guarantee 1 Year Guarantee
Model No 2204
Pack Size 1
Pieces in Pack/Case 1
Product Depth 20 mm
Product Height 74 mm
Product Type Wired Bell Push
Product Width 32 mm
Total Product Weight 0.1 kg

W x D x H: 32 x 20 x 74mm. Mains operated.

Product contents

Fixings supplied.