Product Code: 78132
Electric showers take water from your cold water supply and heat it as you use it. Ajustable riser rail fixings. Versatile footprint. Ideal replacement shower. When upgrading a shower it is essential to ensure that existing circuit protection and cable capacity are adequate. If in doubt, refer to the latest IEE Wiring Regulations BS 7671:2008 or consult a qualified electrician.
Unit, riser rail, hose, wall brackets, handset and fixings.
Control unit W x D x H: 320 x 212 x 65mm. Top and rear cable entry points. Top, bottom and back water entry points. Min. pressure: 0.7bar. Max. flow rate: 4Ltr/min. Suitable for cold mains supply only. Water failure shutdown. WRAS and Max. temperature set at 48°C. Shower head dia: 80mm. Weight 3.83kg. Model: TH85 W.
|Cable Entry Points||Top and rear|
|Manufacturer Guarantee||2 years|
|Manufacturing Standards||WRAS and BEAB Approved|
|Minimum Bar Pressure||0.7 bar|
|Model No||TH85 W|
|No. of Spray Patterns||Single-Spray Pattern|
|Power Control Type||3-Setting Rotary Power Control|
|Power Output (Watts/Kw)||8.5 kW|
|Product Depth||212 mm|
|Product Height||65 mm|
|Product Type||Manual Electric Shower|
|Product Width||320 mm|
|Temperature Control Type||Manual Temperature Control|
|Total Product Weight||3.83 kg|
|Water Entry Points||Top, bottom and back|