Browse store

Bottle Trap Chrome-Plated 32mm (72487)

32mm high quality chrome-plated brass bottle trap with compression outlets. Suitable for sinks and basins. Telescopic, with a 76mm seal and minimalist trap. BS EN 274.

  • Compression Connection
  • Brass Construction

More Info

£18.99INC VAT

Add to basket for...

Bottle Trap Chrome-Plated 32mm is rated 4.2 out of 5 by 19.
  • y_2017, m_4, d_24, h_3
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_19
  • loc_en_GB, sid_72487, prod, sort_[SortEntry(order=FEATURED, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_screwfix

Add to saved list...

Save
Rated 3 out of 5 by from Hard to fit Looks good when fitted - but a pig to get watertight. The rubber seal that fits between sink outlet and top of this trap is too thin and distorts when you tighten it all up - so it leaks. Resorted to ptfe tape around the thread and area where the washer sits - which made it watertight. Also quite hard to get the 32mm chrome pipe to go in to a push fit plastic connector - it will go, but you need to push hard and lube with washing up liquid or similar. Looks good though when done.
Date published: 2017-02-03
Rated 5 out of 5 by from Perfect Product to Finish Looking for a simple understated finish to the bathroom , this product was it .
Date published: 2016-11-08
Rated 4 out of 5 by from Looks good... Nice slim unit No problems installing Make sure you have a chrome sink / plug unit otherwise it looks a bit odd.
Date published: 2016-10-25
Rated 4 out of 5 by from Neat trap A very neat trap that works well with our small corner basin. I did have some issues sealing the trap to the waste but overcame this with some ptfe tape between the nut and flange and on the thread. The highly polished nut is difficult to hand tighten so used a stilson to tweak the nut protected by a generous layer of masking tape. Remains to see regards reliability but I am hopeful.
Date published: 2016-08-15
  • y_2017, m_4, d_24, h_3
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_19
  • loc_en_GB, sid_72487, prod, sort_[SortEntry(order=FEATURED, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_screwfix

Total waste length

From the vertical centre of the bottle trap to the very end of the waste pipe what is the total horizontal length? It states the waste pipe alone is 400mm no mention whether that includes the short horizontal distance of the trap itself.
Asked by: Scotsailor
Hello Scotsailor, The 400mm refers to the "arm" length not from the vertical centre. The measurement from the vertical centre is approximately 515mm. I hope this infromation helps. Thank you for using Q and A.
Answered by: Chubbtonk
Date published: 2017-02-28

Seals on trap

Does this trap come with all the seals to connect to the sink and waste or do these need to be purchased separately?
Asked by: stringy01
  • y_2017, m_4, d_24, h_7CST
  • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_2
  • loc_en_GB, sid_72487, prod, sort_[SortEntry(order=LOCALE, direction=DESCENDING), SortEntry(order=FEATURED, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_screwfix
Specification
Colour Chrome-Plated
Connection Type Compression Connection
Construction Material (Plumbing) Brass
Manufacturer Guarantee 1 Year Guarantee
Pack Size 1
Pieces in Pack/Case 1
Product Depth 458 mm
Product Diameter 32 mm
Product Height 224 mm
Product Type Bottle Trap
Product Width 64.5 mm
Total Product Weight 0.8 kg
Trap Application Sink & Basin Trap
Trap Type Bottle Trap

Waste outlet length: 400mm.

Product contents

Fixings included.