Rated 4 out of 5Â by Gasmancary Fast cut
Very fast cut but not suitable for finer work as the drill bit pulls into the cut so quickly it's difficult to control.
29 Feb 2016
Rated 1 out of 5Â by Dalhi BEWARE!!!!!!!!!!!
I've given this a very poor rating in the hope you will read the real 'problem' associated with this tool.
For cutting holes all the way through a piece of wood it's, no doubt, ace - very fast and accurate.
DON'T TRY TO USE IT FOR DRILLING BLIND HOLES. IT BURIED ITSELF VERY NICELY THE REQUIRED THREE INCHES INTO MY SIX INCH OAK BEAM, BUT WOULD NOT COME BACK OUT WITH THE DRILL IN REVERSE!
TOOK ME AN HOUR WITH MOLE GRIPS AND A CLAW HAMMER TO PULL IT FREE.
For blind holes use the cheaper DeWalt Drill Bit. No problem with that, and nearly as fast.
PLEASE BE CAREFUL.
20 Nov 2015
Rated 3 out of 5Â by Tuk883 Fast but not as clean as hoped
This drill cuts effective holes really quickly and easily. I suffered from two problems. The first, I was drilling into a veneered and painted finish and the drill snagged on the veneer making a slightly tatty hole at the front. The second problem was I wanted to go at a slight angle and close to another hole. Right at the end of the second hole, when the pilot screw had exited the hole, the wood between the holes split at the back of the hole (which was not itself a problem) but the blade then caught in the new split and I could not complete the hole as there was no proper guide anymore. I had to file out the last piece. Generally though a very efficient cut and for a simple straight hole its pretty good.
5 Oct 2015
Rated 4 out of 5Â by marmin drill bits
Quality product pulls in nice drills a clean hole will definitely be gettin more of different sizes
14 Mar 2015