Browse store

FloPlast SP296 Socket Plug Black (46863)

Lightweight socket plug manufactured from uPVC for strength and durability. Easy to work with and suitable for high temperature waste discharges. Ideal for plugging any unused sockets in the soil stack. The use of silicone lubricant on all seals will facilitate jointing.

  • Push-Fit Connection

More Info

£4.19INC VAT

Add to basket for...

FloPlast SP296 Socket Plug Black is rated 4.9 out of 5 by 10.
  • y_2017, m_7, d_19, h_24
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_10
  • loc_en_GB, sid_46863, prod, sort_[SortEntry(order=FEATURED, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_screwfix

Add to saved list...

Save
Rated 5 out of 5 by from Good item Bought this after reading the reviews, stating it fits into the waste coupling. Unfortunately in my case it did not. The rubber seal on the coupler was slightly to thick to allow the cap to fit. Easy to sort out just by cutting out the seal and fitting with silicone. I imagine this would fit the bare pipe perfectly.
Date published: 2017-01-23
Rated 5 out of 5 by from End cap for a soil pipe Very easy to use product for capping off a disused soil pipe
Date published: 2016-10-18
Rated 5 out of 5 by from Brilliant Exactly the right size/shape to cap soil pipe when removing the toilet. Fits the soil joint/socket including the junction in the down pipe. I used some silicone spray around the edges and this slotted in tightly and easily. Why pay more ? Buy with confidence. Feels decent quality not at all flimsy.
Date published: 2016-09-17
Rated 5 out of 5 by from Does the job This did the job of temporarily sealing the soil pipe after removing the toilet during a bathroom refurbishment. Maybe a bit expensive for a plastic blockage but did fit well and seems to do the job I required it for well.
Date published: 2016-06-29
  • y_2017, m_7, d_19, h_24
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_10
  • loc_en_GB, sid_46863, prod, sort_[SortEntry(order=FEATURED, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_screwfix

End cap needed

So my soul pipe has been cut down and is at floor level, I'm unable to cut it down further do you do a stopper/end that fits into the pipe? So I can lay flooring over it?
Asked by: Dogfrog
You will need a universal pipe connector (FloPlast product code 'SP140') to push into the pipe. This will then give you a socket to use a socket plug or access cap.
Answered by: FloPlast Ltd Tech Team
Date published: 2017-05-27

fitting

I have a 110mm diameter old drainpipe hole and want to just push this in to stop any water rising in bad weather is this ideal to just push in and be flat?
Asked by: bernardtime
This item would push into a socket and seal but not into plain ended pipe.
Answered by: FloPlast Ltd Tech Team
Date published: 2017-05-06

I am looking to put a stopper at the end of the woodburning stove pipe. I have removed the stove for now. n Is this Socket Plug the answer? the diameter of the pipe is 16".

Asked by: Anonymous
Are you able to double check the measurements please? A 16" diameter will be approximately 400mm and this socket plug is only 110mm so would not be suitable.
Answered by: FloPlast Ltd Tech Team
Date published: 2017-04-29

Does this stop end fit inside the standard 110mm soil pipe, or does it have to go into an adaptor?

I have cut the soil pipe flush with the floor and need to blank it max 3mm above
Asked by: RoySB
This is a socket plug, there for it needs to fit into a push fit socket. If you have cut the socket from the pipe then you will need to add a socket coupling, typical examples can be found under SKU's 14551 or 13738 which are the codes for grey and will vary if you require black product.
Answered by: FloPlast Ltd Tech Team
Date published: 2016-08-17
  • y_2017, m_7, d_19, h_6CST
  • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_4
  • loc_en_GB, sid_46863, prod, sort_[SortEntry(order=LOCALE, direction=DESCENDING), SortEntry(order=FEATURED, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_screwfix
Specification
Brand FloPlast
Colour Black
Connection Type Push-Fit
Manufacturer Guarantee 1 Year Guarantee
Model No SP296
Pack Size 1
Pieces in Pack/Case 1
Product Diameter 110 mm
Product Type Socket Plug
Total Product Weight 0.128 kg