Armeg Wood Beaver Drill Bit 10mm
Good Bit as the wood is dry
Bought two of these to create 10mm holes in 75mm posts for the bolts when building a kids play fort. I bought two to be on the safe side should one fail as I had a LOT of holes to make. I needed to keep removing the bit to clean if off. Very time consuming and annoying,
The effort was worth it though as the holes were well formed and accurately placed with little to no blow out on the end piece.
The posts were pressure treated ones but a little damp. I kept the off cuts with a view to burning them.
As it turned out I left the old off cuts in my basement for about 4 months and then used them as table legs. (after smartening them up on the Planer / Thickness er
I needed the 10mm drill bit again and it worked rather well. So just to test this I clamped three 75mm off cuts together and drilled it with the 10mm drill bit and an extender, it did need to come in and out a few times but it managed the cut well.
My work was all pine some damp some dry
Dry good result easy effort
Damp good result lots of effort
25 Aug 2015
Not bad budget drill
Not bad but got very hot.
Think i ran it to fast, worked better at slow speeds.
23 Mar 2015
bent drill bit
drill not straight,drill bit is 10mm after drilling hole was 14mm lol,dont buy this drill bit..
21 Nov 2014
A good wood bit
But does clog up and needs to be withdrawn to be cleaned.
Drilling into 100mm Oak sleepers.
19 Aug 2014