Browse store

Stormguard 2-Part Trimline Threshold Gold Anodised 914mm (27432)

914mm. Suits inward and outward opening doors. 24-29mm gap seal. Aluminium and nitrite construction with gold anodised finish. BS EN 1474. Meets Building Regulations Part M Accessibility.

More Info

Bulk Save Save up to 8%
QTY Price per item Saving
1 - 4 £24.99 -
5 + £22.94 Save 8%
£24.99INC VAT

Add to basket for...

Stormguard 2-Part Trimline Threshold Gold Anodised 914mm is rated 4.0 out of 5 by 2.
  • y_2017, m_8, d_14, h_10
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_2
  • loc_en_GB, sid_27432, prod, sort_[SortEntry(order=FEATURED, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_screwfix

Add to saved list...

Save
Rated 4 out of 5 by from no draughts Just installed in a Victorian house (so nothing square). Initially thought the price was a bit steep but as soon as I opened it saw the product was really sturdy and is def worth the money. Seal seems really positive, not tested it in rain but blocked 100% of the draught from the street straight away when fitted. my fitting tip: The spec above says gaps between 24-29mm, in the instructions the manufacturer says the gap should be an even 28mm and the door should be cut to meet this. So be aware that to 'adjust' the gap you should be cutting the door according the instructions. My gap was 24mm and was really tight when shutting and closing. I found I could 'fine tune' the fit by taking a block of soft wood and hammer and knock down the inner and outer alloy flanges of the floor section. That took up a few mm of uneven floor and allowed the door to open and close easier. Much easier if you have already fitted the door section of the kit and don't want to remove it to re-cut the door.
Date published: 2017-04-12
Rated 4 out of 5 by from Does the job Very goid product Covers the gap as stated in the description
Date published: 2015-05-31
  • y_2017, m_8, d_14, h_10
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_2
  • loc_en_GB, sid_27432, prod, sort_[SortEntry(order=FEATURED, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_screwfix

Rubber or brush side out?

The unit comes with brush-type draught excluder outside, rubber one inside. I should have expected the rubber one to be on the outside. ??
Asked by: Soakedinwater
  • y_2017, m_8, d_14, h_17CST
  • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasquestions, tq_1
  • loc_en_GB, sid_27432, prod, sort_[SortEntry(order=LOCALE, direction=DESCENDING), SortEntry(order=FEATURED, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_screwfix
Specification
Brand Stormguard
Colour Gold Anodised
Fixings Supplied Fixings Supplied
Manufacturer Guarantee 1 Year Guarantee
Pack Size 1
Pieces in Pack/Case 1
Product Height 13.5 mm
Product Length 914 mm
Product Type 2-Part Trimline Threshold
Product Width 48 mm

L x W x H: 914 x 48 x 13.5mm. Fixings Supplied.